TL;DR: POS Board 11.6-Inch Secondary Screen
AndroidSBC sourcing desk: dual-screen POS board pricing held flat through the current quarter serving international market, United States. The WF-P7602 POS Android motherboard spans the triple-screen POS terminal with independent content and eleven sister models in the WF-P series, all built on the RK3576 octa-core ARM Cortex-A72 2.2GHz plus Cortex-A53 64-bit SoC with the ARM Mali-G52 MC3 GPU, HDMI plus LVDS plus eDP triple independent output, and Android 14 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-P family from the Longgang source factory in Shenzhen to international market and United States importers who run supermarket checkout lanes, convenience counters, restaurant tills, hotel front desks, fuel forecourt cabinets and unattended payment kiosks.
About AndroidSBC and the POS Android Motherboard Family
The twelve WF-P models share a single peripheral interface contract. A United States distributor who starts on the RK3568 dual-screen tier for a convenience chain can step up to the RK3576 AI tier for a face payment project without changing the printer connector, the touch controller or the OTA workflow. The AndroidSBC engineering desk keeps a reference image per silicon tier, so a United States partner developing against the RK3576 board is testing against the same build that ships in volume, not a one-off sample image.
WF-P7602 Technical Specifications
| Parameter | AndroidSBC WF-P7602 (triple-screen POS terminal with independent content) | Industry Average |
|---|---|---|
| Processor | RK3576 octa-core ARM Cortex-A72 2.2GHz plus Cortex-A53 64-bit SoC | Older 28nm or 40nm quad-core SoC |
| Process node | 8nm | Older 28nm or 40nm process |
| GPU | Mali-G52 MC3 | Older Mali-450 or basic GPU |
| NPU / AI | 6 TOPS | No NPU on competing entry boards |
| Memory | 16GB LPDDR5 | DDR3 1GB / 2GB on competing boards |
| Storage | 128GB eMMC | eMMC 5.0 8GB / 16GB on competing boards |
| Display output | HDMI plus LVDS plus eDP triple independent output | Single HDMI 1080p only on competing boards |
| Touch support | 10-point capacitive touch | Resistive single-touch on competing boards |
| Operating system | Android 14 | Android 8 or Android 9 on competing boards |
| Connectivity | WiFi 6 802.11ax plus Bluetooth 5.0 plus dual Gigabit Ethernet | WiFi 4 plus 10/100M Ethernet on competing boards |
| POS peripherals | Thermal printer, receipt printer, barcode scanner, cash drawer, customer display | No bundled printer, scanner or drawer driver SDK on competing boards |
| Operating temperature | 0C to 50C | 0C to 40C on competing boards |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-P7602 (triple-screen POS terminal with independent content) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For United States importers sourcing the WF-P family, the WF-P7602-A variant is the typical configuration for the hypermarket checkout plus promotion wall use case, with a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing POS Android Motherboards for United States Buyers
POS counters punish hardware in a way that office equipment never does. Grease, steam, spilled drink, a drawer slammed shut ten thousand times a month, and a mains supply that dips every afternoon - the United States rollout fails on those details long before it fails on CPU benchmarks.
For international market integrators worried about the trading-company risk, AndroidSBC ships from the same building the boards are built in. The source factory address is on the packing list, the test record carries a serial number, and the FCC Part 15 and FCC ID for radio modules, plus UL or ETL safety listing route used in United States is issued against that factory, not against a reseller. The international market rollout passed its qualification gate on September 23, 2026, and 28600 boards were released into production the same week for the Los Angeles - Shanghai lane, with the sample and the volume lot built from the same component batch.
Competitive Comparison: WF-P7602 vs Competing POS Android Boards
The comparison below is the one international market buyers run when they shortlist three Chinese factories, and it is where the WF-P family separates from the field.
- Platform breadth: twelve models on eight chips (RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing the driver stack or the mounting pattern.
- Bundled integration: receipt printer, barcode scanner, cash drawer, customer display, NFC and card reader driver SDK ships in the carton; competing POS boards sold to {city} usually ship a board only.
- Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
- Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing POS boards reaching {city}.
Global POS Terminal and Smart Checkout Market Trends
AI is entering the lane for unglamorous reasons. Product recognition at an unattended counter, face payment at a convenience chain, and basket analytics at a supermarket all need an NPU on the board, and the triple-screen POS terminal with independent content tier carries one rather than pushing the load onto the CPU.
- Entry counter tier: WF-P7602 covers single-screen checkout and small format stores, where the brief is a reliable 1080p panel, a receipt printer and a cash drawer on one board.
- Dual-screen mainstream tier: WF-P1330 drives the cashier screen and the customer display independently, which is the configuration most restaurant and supermarket rollouts standardise on.
- AI and unattended tier: WF-P6180 carries the NPU, the wide temperature window and the watchdog behaviour that face payment counters and outdoor cabinets require.
Growth in United States is concentrated in the formats the WF-P family was built for: convenience, quick service, supermarket checkout and unattended payment.
WF-P7602 Application Scenarios
The WF-P7602 triple-screen POS terminal with independent content sits inside a twelve-variant WF-P POS Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-P7602-A configuration is the typical build for the hypermarket checkout plus promotion wall use case, with receipt printer, scanner and cash drawer driver SDK plus staged OTA management bundled.
- Supermarket and hypermarket checkout: the WF-P7602 drives the cashier screen while the second lane carries the customer display or the promotion wall in international market.
- Convenience and small format stores: the WF-P3600 fits a narrow counter with a receipt printer, a barcode scanner and a cash drawer on one board.
- Restaurants and quick service: the WF-P3601 runs the order screen plus a kitchen display output, with the customer display showing the order total.
- Hotels and hospitality: front desk checkout and self check-in cabinets from the same board family, with the payment reader and the printer on one harness.
- Unattended retail and vending: the WF-P3602 holds a 7x24 duty cycle in a cabinet with no staff to reset it.
- Fuel forecourts and parking: the WF-P3566 runs the outdoor payment cabinet, where the wide temperature window and the watchdog matter more than raw CPU.
- Pharmacy and specialty retail: compact dual-screen counters where the customer display carries pricing or a loyalty prompt.
- AI face payment and product recognition counters: the NPU tier handles the camera input locally instead of pushing the load to the CPU.
- Retrofit programmes in international market: the same board re-uses the existing enclosure, panel and counter harness, so an installed estate can be upgraded lane by lane.
Partnership Models for international market Buyers
Because the WF-P family is built at the Longgang source factory, all three tracks below come with the same frozen BOM and the same seven-year firmware window.
- Distribution track: the partner buys the WF-P board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
- Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
- Private-label track: the WF-P board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.
For international market buyers the practical difference between the tracks is who holds the stock and whose name is on the carton, not what is inside the carton.
Frequently Asked Questions
Does the WF-P POS Android motherboard family support a triple-screen POS terminal with independent content?
Answer: Yes - triple-screen POS terminal with independent content is supported across the WF-P line, and the international market configuration is locked as the reference for later lots so re-orders behave identically.
Which silicon tiers are available in the WF-P family for United States buyers?
Answer: Eight silicon tiers are offered, and the RK3576 platform sits in the middle of the range. Each tier carries the same peripheral interface contract, so a international market partner can move between them without re-writing drivers.
Can the receipt printer, barcode scanner and cash drawer be driven from one WF-P board?
Answer: It can. The WF-P family is specified so one board carries the full counter harness: printer, scanner, drawer, customer display and payment reader, with no expansion card required.
What is the minimum order quantity and the sample lead time for United States?
Answer: One board is enough to start: samples leave Longgang in 1-3 days. Volume orders run 15-30 days, and the international market partner can call off against a frame agreement rather than ordering in one block.
Is custom ROM, boot logo or pre-installed app development available?
Answer: Yes. The engineering desk handles custom ROM, boot branding, pre-installed apps, BSP porting and SDK modules, and the international market partner keeps the same image across re-orders.
How are firmware updates delivered to a United States estate after deployment?
Answer: The OTA channel is staged and reversible. A international market chain pushes to a pilot group first, and if a printer or drawer regression appears the image rolls back to the previous build.
What shipping terms does AndroidSBC support for United States orders?
Answer: FOB Shenzhen, CIF and EXW are quoted on the same price list. Export customs clearance and global shipping are handled from Longgang, and the international market partner receives tracking with the lot.
What happens if a board fails in the field in United States?
Answer: Failures are handled against the serialised test record. AndroidSBC traces the unit to its lot, confirms the BOM, and ships a replacement from the international market call-off stock or the next production slot.
Contact AndroidSBC: Start Your WF-P7602 Sourcing Conversation
To start a WF-P POS Android motherboard sourcing conversation with AndroidSBC, a Wanlin Manufacturing Group export brand, international market integrators can reach the export desk through the following channels:
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
A 1-3 day sample lead applies to United States buyers, a 15-30 day mass-production lead to bulk orders, and a seven-year firmware update window to the WF-P family.
